- TDR Tester
Automatic High Frequency Measurement System.
VNA can be installed.
E2V6151
VNA Tester
E2V6151
New machine line up, which are equipped with VNA (Vector Network Analyzer). Designed for measuring S-parameters, and characteristic evaluation for devices and boards used for 5G applications.
Detailed Specification
| E2V6151 (2 axis) | ||
|---|---|---|
| Max. Test Area | 22.8 x 18.9” (580 x 480 mm) |
|
| Clamp System | Pneumatic Clamp |
|
| Rotate Radius | 180° |
|
| Repeatable Accuracy X–Y | ±0.16 mil (±4 µm) |
|
| Repeatable Accuracy θ | — |
|
| Air Supply: Pressure | 0.5 MPa |
|
| Air Supply: Volumetric flow rate | 0.12 ft³/min. (3.5 ℓ/min) |
|
| Power Supply Single Phase AC200–240 V 50/60 Hz |
10 A |
|
| Weight | 3307 lbs. (1500 kg) |
|
| Dimensions [ unit: inch(mm) ] |
|
|
| Required System | Control PC & Monitor *1 |
|
| Operating Conditions | 70–75°F (21–24°C), 30–70% relative humidity * Do not use under the environment that has heavy condensing, dust, vibration, and/or corrosive gas. Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below) Oil Mist Concentration: 1 mg/㎥ (ANR) or below |
|
Supported Meter *2
| Keysight Technologies | N5224B |
|---|---|
| Rohde & Schwarz | ZNB40 |
- Please feel free to contact us for questions regarding the machine specs, quotes, inquiries for a brochure from the following phone number or the inquiry form. The equipment seen in the lineup are customizable to address your needs.
-
- Inquiries by phone
+1-714-482-2550 - Inquiries by email
Inquiry form
- Inquiries by phone