MicroCraft

  • TDR Tester

Single Side TDR Measurement System

HT6060

HT6060

Automated Single-Sided TDR Measurement System
HT6060
Single End and Differential Impedance Measurements are available. MicroCraft's unique Rotating Head and ionizer for discharging static are included. Full automation option is also in the lineup.

HT6060

Measurement of differential impedance with installation of differential probe

Detailed Specification

HT6060
Max. Test Area

23.6 x 23.6” (600 x 600 mm)

Min. Board Size

1.6 x 1.6” (40 x 40 mm)

Max. Board Thickness

0.39” (10 mm)

Clamp System

Manual

Rotate Radius

360°

Repeatable Accuracy X–Y

±0.4 mil (±10 µm)

Repeatable Accuracy θ

Impedance Accuracy *1

50 Ω±1%

Automation

No (can be installed)

Air Supply

N/A

Power Supply
Single Phase AC200–240 V 50/60 Hz

5 A

Weight

720 kg

Dimensions [ unit: inch(mm) ]

Required System

Control PC & Monitor *2

Operating Conditions 70–75°F (21–24°C), 30–70% relative humidity
* Do not use under the environment that has heavy condensing, dust, vibration, and/or corrosive gas.
Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below)
Oil Mist Concentration: 1 mg/㎥ (ANR) or below

*1 Fluctuation at room temperature after calibration is ±2°C *2 Please contact our sales for details.

Supported Meter *3

Tektronix

DSA8300
DSA8200
TDS8000
11801B/C

Keysight Technologies

E5063A option TDR
E5071C+ENA option TDR
86100A/B/C
54750
N5224B

Teledyne LeCroy

WaveExpert100H+ST-20

MicroCraft

MZPC30
MZPC50

*3 Please contact our sales for details. Meters to be purchased separately.

TOP