C2K / CraftPix

On-demand InkJet Printing System

Standard model with 2048 nozzles

C2K model

Standard Model
C2K6151 / C2K7861
This standard model is equipped with two print heads. Resolution can be changed in 30 dpi increments in the horizontal direction, allowing fine-tuning of the printed result. This is a substantial model with excellent total balance.

Standard Model (Super Large Size Model)
C2K11078 / C2K11091 / C2K120110
CraftPix also comes in Super Large Size Model capable of printing extremely large work size. Print speed and quality is equivalent of these models in standard 6151 / 7861 size. This model is also installed with single direction printing with moving print head unit, however the main feature is that print head moves in front / rear direction.

Detailed Specification (C2K6151/7861)

	C2K6151	C2K7861
Max. Panel Size	24.6 x 21” (625 x 535 mm)	31.3 x 25.6” (795 x 651 mm)
Max. Discharge Frequency	45 kHz	45 kHz
X-axis Resolution (dpi)	360 / 720 / 1080 / 1440	360 / 720 / 1080 / 1440
Y-axis Resolution (dpi)	720 / 1440 / 2160	720 / 1440 / 2160
Min. Droplet Size	6 pl / 13 pl	6 pl / 13 pl
Number of Nozzles	2 x 1024 (2048)	2 x 1024 (2048)
Standard Resolution	720 dpi	720 dpi
Min. Line Width *1	70 µm–90 µm	70 µm–90 µm
Speed *2	22.8x17” (580 x 430 mm): 17 seconds 24 x 20” (610 x 510 mm): 23 seconds	22.8x17” (580 x 430 mm): 17 seconds 24 x 20” (610 x 510 mm): 23 seconds 30.7 x 24” (780 x 610 mm): 31 seconds
Number of Ink Tank	1	1
Ink Tank Volume (Max.)	1000 ml	1000 ml
On-Head UV Lamp *3	LED-UV lamp	LED-UV lamp
Number of Alignment Cameras	1	1
Camera Resolution	0.33 x 0.24” (8.4 x 6.3 mm)	0.33 x 0.24” (8.4 x 6.3 mm)
Air Supply: Pressure	0.5 MPa	0.5 MPa
Air Supply: Volumetric flow rate	2.7 ft³/min. (75 ℓ/min.)	2.7 ft³/min. (75 ℓ/min.)
Power Supply *4 Single Phase AC200–240 V 50/60 Hz	15 A	15 A
Weight	1543 lbs. (700 kg)	2205 lbs. (1000 kg)
Dimensions [ unit: inch(mm) ]
Operating Conditions	70–75°F (21–24°C), 30–70% relative humidity * Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas. Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below) Oil Mist Concentration: 1 mg/㎥ (ANR) or below

*1 Depends on ink *2 While using UV pinning type ink, speed spec may change according to required UV energy. Print times do not include image alignment, shuttle and load and unload time. Please confirm the printing quality and speed by allowing us to run a benchmark test at MicroCraft. *3 LED UV lamp to be mounted depends on the ink to be used. *4 Separate power source for cooling device and vacuum pump is necessary (specifications may be different in some countries). § Replacement of ink requires special training § CraftPix consumables are ink, cleaning fluid, filter, sending fluid tube, UV lamp, array unit, vacuum paper, temperature sensor, heater, etc. § Please contact MicroCraft for detailed specification.

Detailed Specification (C2K11078 / 11091 / 120110)

	C2K11078	C2K11091	C2K120110
Max. Panel Size	45 x 31.1” (1142 x 790 mm)	45 x 35.8” (1142 x 910 mm)	48 x 44” (1220 x 1120 mm)
Max. Discharge Frequency	45 kHz	45 kHz	45 kHz
X-axis Resolution (dpi)	360 / 720 / 1080 / 1440	360 / 720 / 1080 / 1440	360 / 720 / 1080 / 1440
Y-axis Resolution (dpi)	720 / 1440 / 2160	720 / 1440 / 2160	720 / 1440 / 2160
Min. Droplet Size	6 pl / 13 pl	6 pl / 13 pl	6 pl / 13 pl
Number of Nozzles	2 x 1024 (2048)	2 x 1024 (2048)	2 x 1024 (2048)
Standard Resolution	720 dpi	720 dpi	720 dpi
Min. Line Width *1	70 µm–90 µm	70 µm–90 µm	70 µm–90 µm
Speed *2	22.8x17” (580 x 430 mm): 17 seconds 24 x 20” (610 x 510 mm): 23 seconds 30.7 x 24” (780 x 610 mm): 31 seconds 43.3 x 30.7” (1100 x 780 mm): 58 seconds	22.8x17” (580 x 430 mm): 17 seconds 24 x 20” (610 x 510 mm): 23 seconds 30.7 x 24” (780 x 610 mm): 31 seconds 43.3 x 30.7” (1100 x 780 mm): 58 seconds	22.8x17” (580 x 430 mm): 17 seconds 24 x 20” (610 x 510 mm): 23 seconds 30.7 x 24” (780 x 610 mm): 31 seconds 43.3 x 30.7” (1100 x 780 mm): 58 seconds
Number of Ink Tank	1	1	1
Ink Tank Volume (Max.)	1000 ml	1000 ml	1000 ml
On-Head UV Lamp *3	LED-UV lamp	LED-UV lamp	LED-UV lamp
Number of Alignment Cameras	1	1	1
Camera Resolution	0.33 x 0.24” (8.4 x 6.3 mm)	0.33 x 0.24” (8.4 x 6.3 mm)	0.33 x 0.24” (8.4 x 6.3 mm)
Air Supply: Pressure	0.5 MPa	0.5 MPa	0.5 MPa
Air Supply: Volumetric flow rate	2.7 ft³/min. (75 ℓ/min.)	2.7 ft³/min. (75 ℓ/min.)	2.7 ft³/min. (75 ℓ/min.)
Power Supply *4 Three Phase AC200–230 V 50/60 Hz	20 A	20 A	20 A
Weight	3748 lbs. (1700 kg)	4850 lbs. (2200 kg)	5952 lbs. (2700 kg)
Dimensions [ unit: inch(mm) ]
Operating Conditions	70–75°F (21–24°C), 30–70% relative humidity * Free of moisture, dust (ISO class 7 (FED-STD-209D Class10,000) clean room or better), vibration, and corrosive gas. Atmospheric Dew Point: −14°C or below (at 0.7 Mpa, dew point is 15°C or below) Oil Mist Concentration: 1 mg/㎥ (ANR) or below

Common Specification

Board Thickness	0.004 to 0.24” (0.1–6.0 mm) 5 compatibility for thickness exceeds 0.24” (6.0 mm) is optional
Monitor	Touch Screen LCD Monitor
Software	Windows 10 / Windows 11
Data Input Format	RS274X, RS274D, ODB++, DPF, DXF, BMP 6, TIFF 6

*5 When the vacuum table is used. Figures depend on the board warpage and clamp type. Printing quality may decrease with warpage. Please contact MicroCraft for more precise figures for specific conditions. *6 Scaling and alignment functions are not usable.

Vacuum Pump *

Power Supply	Three Phase AC200 V 10 A 50/60 Hz, AC220 V 10 A 60 Hz
Capacity	50 Hz: 20.7 ft³/min. (575 ℓ/min.) 60 Hz: 24.7 ft³/min. (685 ℓ/min.)
Air Coupler Size	RC 3/4
Weight	187.4lbs. (85 kg)

* Depends on clamping method

Please feel free to contact us for questions regarding the machine specs, quotes, inquiries for a brochure from the following phone number or the inquiry form. The equipment seen in the lineup are customizable to address your needs.
- Inquiries by phone
  +1-714-482-2550
- Inquiries by email
  Inquiry form